Abyssgh0st
Apr 28, 11:54 AM
Yikes. I just read through this entire thread and it was quite the read.
1. I still find it hard to accept that there are numbskulls out there who doubt that the freaking PRESIDENT of the UNITED STATES was not born here. Seriously? And then to claim it's not about race? Then what is it about, his politics? Just because you don't like what he does or says? Yeah right.
2. Conservatives really have tunnel vision. They focus on static topics such as homosexuals, abortion, marijuana, etc. They fail to realize that because these things will never disappear, they should still lobby against them. They think that they should never 'lay down' and not let 'evil' prevail. They are seriously wrong, especially since these issues don't actually effect them. It is ignorance on their parts because instead of fighting issues that can change (wars, spending, healthcare), they focus on the few that are not going anywhere (at least not a regression, they will only become more prevalent), rather than the sea of issues that are malleable.
1. I still find it hard to accept that there are numbskulls out there who doubt that the freaking PRESIDENT of the UNITED STATES was not born here. Seriously? And then to claim it's not about race? Then what is it about, his politics? Just because you don't like what he does or says? Yeah right.
2. Conservatives really have tunnel vision. They focus on static topics such as homosexuals, abortion, marijuana, etc. They fail to realize that because these things will never disappear, they should still lobby against them. They think that they should never 'lay down' and not let 'evil' prevail. They are seriously wrong, especially since these issues don't actually effect them. It is ignorance on their parts because instead of fighting issues that can change (wars, spending, healthcare), they focus on the few that are not going anywhere (at least not a regression, they will only become more prevalent), rather than the sea of issues that are malleable.
soldierblue
Apr 20, 02:51 PM
Apple filed similar suits again HTC and Nokia last spring. You'll notice that the ITC is not favoring Apple's claims.
likemyorbs
Mar 18, 01:58 AM
The ultimate goal of the anti-religious elites is to transform America into a completely secular nation, a nation that is legally and culturally biased against Christianity. � Ron Paul
Uhhh....didn't america become a fully secular nation a few centuries ago? pretty sure i grew up in a secular nation. america is NOT a christian nation, never was, and definitely never will be. As for the second part about being biased against christianity, that's just too unintelligent and ignorant to respond too, i wouldn't even know where to begin. The day we start taxing churches, but not other religious houses of worship, is the day we become biased against christianity. personally i don't think religious organizations should be tax exempt. We can totally fix the deficit just by taxing the catholic church alone...
Uhhh....didn't america become a fully secular nation a few centuries ago? pretty sure i grew up in a secular nation. america is NOT a christian nation, never was, and definitely never will be. As for the second part about being biased against christianity, that's just too unintelligent and ignorant to respond too, i wouldn't even know where to begin. The day we start taxing churches, but not other religious houses of worship, is the day we become biased against christianity. personally i don't think religious organizations should be tax exempt. We can totally fix the deficit just by taxing the catholic church alone...
Silentwave
Sep 14, 11:00 PM
One thing's for sure, Intel appears to have learnt a great deal from the Netburst fiasco -- how not to do things, if nothing else. Unfortunately, they still estimate ~50% of processors shipping in 1Q2007 will be netburst-based (mostly Pentium-D).
It is a shame, but sadly those are the real cheap chips right now. The good news is that they'll change those over soon enough with more Allendales, then millville and so on and so on taking on more segments of the market.
I think as they transition to 45nm we'll see more and more Core chips, simply because they'll want as much manufacturing to be on the new process as possible, and they don't need to scale the D's etc. down to it.
It is a shame, but sadly those are the real cheap chips right now. The good news is that they'll change those over soon enough with more Allendales, then millville and so on and so on taking on more segments of the market.
I think as they transition to 45nm we'll see more and more Core chips, simply because they'll want as much manufacturing to be on the new process as possible, and they don't need to scale the D's etc. down to it.
mkruck
Apr 6, 03:06 PM
Yeesh dude, at least your wife cares enough to do nice things for you. :(
Yes, and my response that you quoted was said tongue in cheek. People really need to lighten up and stop taking themselves so seriously.
Sent from my Xoom using Tapatalk
Yes, and my response that you quoted was said tongue in cheek. People really need to lighten up and stop taking themselves so seriously.
Sent from my Xoom using Tapatalk
RWinOR
Mar 31, 09:21 PM
I am so happy my android phone is open source and can be tweaked at any time by the various phone manufactures. Where else could I end up with a phone that thinks I am so Eastern European country in he morning, and some South Pacific island in the afternoon, while I really have never left the North West of the U.S. Lets here it for android and open source. This problem has be going on for about 1.5 years I have been told it is not a problem and I need to learn to live with it.
I would take Apples approach any day. If only the I phone was available on my preferred carrier. Not a fan of ATT and my wife dislikes Verizon. Bummer for me.
I would take Apples approach any day. If only the I phone was available on my preferred carrier. Not a fan of ATT and my wife dislikes Verizon. Bummer for me.
mdriftmeyer
Aug 26, 06:18 AM
Manufacturing observation:
Back in 1996 every major manufacturer did most of its assembly in the U.S. or Western Europe.
Take a guess where it mainly resides now?
People want a $1000 laptop/notebook. Back in 1996 they'd be lucky to get an DX4/100 Intel PC for $1000 by Digital, HP, Compaq, etc.
Check this old message group Email about the Alpha Processor (Then cutting edge)
http://www.xent.com/summer96/0060.html
If you think offloading manufacturing/assembly to third world countries for pennies on the dollar only gives us cheap and powerful computer to use then you really miss the boat on QA.
You aren't going to get systems for basement prices that include Workstation reliable parts, assembly and longevity from anyone.
Battery flaws that SONY has are affecting many in the industry.
Motherboard designs for these new generation chips will always produce flaws.
Second revision rule of thumb.
When you go and buy a car do you buy the first year of a new model? Or do you wait a year or two?
The Auto Industry has been building cars for over 100 years and they still get horrendous recalls.
Get used to the disposable society. From Blenders, to hairdryers/coffee makers, to major tool manufacturers the days of buy and use for a decade or more cost major bucks and the low end, plastic encased models are tested for failure time frames.
This business market is driving people to purchase every twelve or less months.
I'm still going to wait on revision B of the Mac Pro. I've got more than one operating system/hardware combo and I won't die without the Mac Pro.
Back in 1996 every major manufacturer did most of its assembly in the U.S. or Western Europe.
Take a guess where it mainly resides now?
People want a $1000 laptop/notebook. Back in 1996 they'd be lucky to get an DX4/100 Intel PC for $1000 by Digital, HP, Compaq, etc.
Check this old message group Email about the Alpha Processor (Then cutting edge)
http://www.xent.com/summer96/0060.html
If you think offloading manufacturing/assembly to third world countries for pennies on the dollar only gives us cheap and powerful computer to use then you really miss the boat on QA.
You aren't going to get systems for basement prices that include Workstation reliable parts, assembly and longevity from anyone.
Battery flaws that SONY has are affecting many in the industry.
Motherboard designs for these new generation chips will always produce flaws.
Second revision rule of thumb.
When you go and buy a car do you buy the first year of a new model? Or do you wait a year or two?
The Auto Industry has been building cars for over 100 years and they still get horrendous recalls.
Get used to the disposable society. From Blenders, to hairdryers/coffee makers, to major tool manufacturers the days of buy and use for a decade or more cost major bucks and the low end, plastic encased models are tested for failure time frames.
This business market is driving people to purchase every twelve or less months.
I'm still going to wait on revision B of the Mac Pro. I've got more than one operating system/hardware combo and I won't die without the Mac Pro.
takao
Dec 3, 05:28 PM
I've started rally a bit today while i save up for a car with a bit more balls. Rally is completely sublime. I am loving every second of it. I had no problem with the dirt and snow tracks, but the tarmac rally is giving me some trouble. I use an 06 Focus ST that is around 215hp, so i can bump up the HP and still compete in the series. I might just have to do that.
same here .. on tarmac level there always seems to be 1 car in the bunch who will cause me troubles with being really fast
same here .. on tarmac level there always seems to be 1 car in the bunch who will cause me troubles with being really fast
charlituna
Apr 5, 11:48 PM
YES!!! (http://www.youtube.com/watch?v=eyqUj3PGHv4)
Did you see the Conan version.
I hope the next release of FCS integrates the different apps within the suite under a single UI.
I don't have an issue with the apps being separate but I do agree that a more common UI would be nice.
And I too hope to see the rest of Shake return in some form or another.
The speculation is that REDRay will be used for everything from 4K DCP playback in movie theaters to a download/streaming version that will be usable for buying up to 4K movies through iTunes.
if this means we could get HD itunes that are actually blu-ray quality without it being 50 GB I'm all for it.
I hope they ship it on DVD as i'm not going to tie up my Internet connection for 3 hrs while it downloads:(
Agreed. If not DVDs then a flash drive like they did the restore stuff for the Airs
I doubt Apple will ship a new version of FCP before they ship lion,
folks said the same thing about FCS3 and Snow Leopard and yet as I recall that is exactly what they did.
Ugh. Final Cut is fine the way it is for now... We need iWeb overhaul!! Make it more search engine friendly, none of the text as an image crap. grrr...
Final Cut is fine but it could be much better. Both full studios in fact could be much much better in a number of ways
That said, there are rumors about iWeb being revamped which is why it wasn't updated in iLife 11. And about the release of an iweb for ipad app. So you might get your wish
Did you see the Conan version.
I hope the next release of FCS integrates the different apps within the suite under a single UI.
I don't have an issue with the apps being separate but I do agree that a more common UI would be nice.
And I too hope to see the rest of Shake return in some form or another.
The speculation is that REDRay will be used for everything from 4K DCP playback in movie theaters to a download/streaming version that will be usable for buying up to 4K movies through iTunes.
if this means we could get HD itunes that are actually blu-ray quality without it being 50 GB I'm all for it.
I hope they ship it on DVD as i'm not going to tie up my Internet connection for 3 hrs while it downloads:(
Agreed. If not DVDs then a flash drive like they did the restore stuff for the Airs
I doubt Apple will ship a new version of FCP before they ship lion,
folks said the same thing about FCS3 and Snow Leopard and yet as I recall that is exactly what they did.
Ugh. Final Cut is fine the way it is for now... We need iWeb overhaul!! Make it more search engine friendly, none of the text as an image crap. grrr...
Final Cut is fine but it could be much better. Both full studios in fact could be much much better in a number of ways
That said, there are rumors about iWeb being revamped which is why it wasn't updated in iLife 11. And about the release of an iweb for ipad app. So you might get your wish
Eidorian
Aug 26, 04:50 PM
A Merom thread? On my MacRumors?
http://guides.macrumors.com/Merom
http://guides.macrumors.com/Merom
dayne33
Aug 27, 01:58 PM
I was just checking out the CD vs C2D comparison at Anandtech, pretty interesting stuff.
My question is this, is Santa Rosa strictly the mobile platform? I'm a student holding off for an iMac revision, and am wondering if apple utilizes Conroe in the iMac, will the faster FSB's be supported? Is an updated platform already available for Conroe? (I guess I had more than one question:rolleyes: )
Thanks
My question is this, is Santa Rosa strictly the mobile platform? I'm a student holding off for an iMac revision, and am wondering if apple utilizes Conroe in the iMac, will the faster FSB's be supported? Is an updated platform already available for Conroe? (I guess I had more than one question:rolleyes: )
Thanks
ccrandall77
Aug 11, 02:03 PM
EDGE is not meant to compare with EVDO, UTMS is.
Can you imagine them making the phone only for CDMA? That translates to "US only." There will be a GSM version, it will most likely support UTMS, which is as good or better than EVDO.
Even assuming for the sake of argument, which I don't in reality, that CDMA is better than GSM for voice, the annoyance of not being able to swap SIM cards is enough for me to avoid it.
That and the fact I can't use it anywhere outside the US.
I agree that EVDO is more analgous to UTMS than EDGE, but for now in most places UTMS is not present... esp the US. So when I compare CDMA technologies to GSM technologies for domestic carriers, the CDMA camp wins hands down.
There are many places CDMA is used outside the US. From the maps I've seen, much of Asia, Australia, and the Americas have CDMA coverage. And has I mentioned in a previous post, the big 2 (VZW and Sprint) do offer hybrid CDMA/GSM phones (or at least they did... we can still apparently get them through our business).
I WHOLEHEARTEDLY agree about your point on SIM cards. I wish to God Sprint had SIM cards. I have a Treo 700p and I LOVE IT!!! But I don't want to haul it around with me everywhere. Frequently I steal my wife's new Samsung A900 since it's so thin and is hardly noticable in my pocket. I'd love to have the freedom to have 1 line and 2 phones.
Can you imagine them making the phone only for CDMA? That translates to "US only." There will be a GSM version, it will most likely support UTMS, which is as good or better than EVDO.
Even assuming for the sake of argument, which I don't in reality, that CDMA is better than GSM for voice, the annoyance of not being able to swap SIM cards is enough for me to avoid it.
That and the fact I can't use it anywhere outside the US.
I agree that EVDO is more analgous to UTMS than EDGE, but for now in most places UTMS is not present... esp the US. So when I compare CDMA technologies to GSM technologies for domestic carriers, the CDMA camp wins hands down.
There are many places CDMA is used outside the US. From the maps I've seen, much of Asia, Australia, and the Americas have CDMA coverage. And has I mentioned in a previous post, the big 2 (VZW and Sprint) do offer hybrid CDMA/GSM phones (or at least they did... we can still apparently get them through our business).
I WHOLEHEARTEDLY agree about your point on SIM cards. I wish to God Sprint had SIM cards. I have a Treo 700p and I LOVE IT!!! But I don't want to haul it around with me everywhere. Frequently I steal my wife's new Samsung A900 since it's so thin and is hardly noticable in my pocket. I'd love to have the freedom to have 1 line and 2 phones.
zacman
Apr 19, 02:59 PM
Hmm.
What about this:
http://www.comscore.com/Press_Events/Press_Releases/2011/4/comScore_Reports_February_2011_U.S._Mobile_Subscriber_Market_Share
http://www.comscore.com/Press_Events/Press_Releases/2011/3/comScore_Reports_January_2011_U.S._Mobile_Subscriber_Market_Share
That's US mobile subscribers marketshare for Jan and Feb '11. My numbers are worldwide smartphone marketshare. Completly different things.
What about this:
http://www.comscore.com/Press_Events/Press_Releases/2011/4/comScore_Reports_February_2011_U.S._Mobile_Subscriber_Market_Share
http://www.comscore.com/Press_Events/Press_Releases/2011/3/comScore_Reports_January_2011_U.S._Mobile_Subscriber_Market_Share
That's US mobile subscribers marketshare for Jan and Feb '11. My numbers are worldwide smartphone marketshare. Completly different things.
zelet
Aug 25, 02:46 PM
dotMac support is horrible! There have been a ton of problems with their email service being labeled as a spam source lately. They aren't fixing the problem and there is no way of contacting support besides some worthless email form that only gets you canned responses in reply. They have no phone support either.
So, for a $100 a year service you get a blacklisted email address and no support. Yay for Apple!
So, for a $100 a year service you get a blacklisted email address and no support. Yay for Apple!
dsnort
Mar 31, 09:03 PM
[SIZE=1] The very fact that the Gingerbread source is available has given my Orange UK branded ZTE Blade Gingerbread before other phones had official builds.
Could you re-write the sentence so that it has a subject and a predicate?
Could you re-write the sentence so that it has a subject and a predicate?
unlinked
Apr 6, 02:28 PM
I guess it wouldn't hurt their future sales to announce international release dates. Several people I know have ordered or bought an iPad 2 simply because it is available (even with order backlogs) compared to Honeycomb tablets.
Here in continental Europe, all I saw so far was an announcement for the second quarter, which can slip to whenever...
Those of you who already got it - is it worth the wait?
I'm thinking of passing on the Xoom at this stage and picking up one of the many other honeycomb tablets instead. Apparently the EEE pad transformer will be launched in Europe in a few days. I saw some reports the Xoom was launched in Canada today with only a few hundred units available. Bit of a joke really.
Here in continental Europe, all I saw so far was an announcement for the second quarter, which can slip to whenever...
Those of you who already got it - is it worth the wait?
I'm thinking of passing on the Xoom at this stage and picking up one of the many other honeycomb tablets instead. Apparently the EEE pad transformer will be launched in Europe in a few days. I saw some reports the Xoom was launched in Canada today with only a few hundred units available. Bit of a joke really.
SlavKO
Jun 9, 08:20 PM
Thx for the info. Would it be possible to call and preorder from the store I want to pick it up from even if it isnt in my state?
Anyone?
THx
Anyone?
THx
ergle2
Sep 19, 10:08 PM
Yeah and they werent in Macs, so I didnt care.
Why do you care?
Why do you care?
inhrntlyunstabl
Apr 27, 09:54 AM
And I'm sure when the next Apple-gate story gets created, the blind fanbois will jump to their defense. :rolleyes:
Hey Birther, guess what else happened today?! :eek:
Too many conspiracy addicts out there. Let it go and live your life.
Hey Birther, guess what else happened today?! :eek:
Too many conspiracy addicts out there. Let it go and live your life.
Rodimus Prime
Mar 22, 04:14 PM
honestly I like the smaller 7in size for tablets. 10 ins is just a little to large for my task.
For me size requirements is something that can fit into a coat pocket/ outside pocket of my backpack.
Both of which a 10in tablet is just to large for but a 7 in is a great sweet spot for it.
For me size requirements is something that can fit into a coat pocket/ outside pocket of my backpack.
Both of which a 10in tablet is just to large for but a 7 in is a great sweet spot for it.
jeanlain
Apr 12, 03:55 AM
"Insufficient content"
Is an error message that pops up at random. Very frustrating.
But Compressor don't. At least not if you send something from FC directly. You have to create a QuickTime file first, then open that in Compressor, then it will use all your cores.
BUT only if you have manage to set up Qmaster correctly first. It took me 5 days online to figure this out and make it work properly. I still come to post houses where they haven't figured this out.
It shouldn't have to be this complicated
The insufficient content shouldn't pop up at random, or there is a bug. It pops up when there is insufficient content for a transition. Some transitions like crossfade are centered at the end/starting point of a clip. So it expands past/before this point, hence the need of additional content in the file.
I didn't know about that multicore issue with Compressor when launched directly from the timeline. I suspect an issue with your setup. Compressor does make good use of my 4 cores on mpeg2 and I never set up Qmaster.
Is an error message that pops up at random. Very frustrating.
But Compressor don't. At least not if you send something from FC directly. You have to create a QuickTime file first, then open that in Compressor, then it will use all your cores.
BUT only if you have manage to set up Qmaster correctly first. It took me 5 days online to figure this out and make it work properly. I still come to post houses where they haven't figured this out.
It shouldn't have to be this complicated
The insufficient content shouldn't pop up at random, or there is a bug. It pops up when there is insufficient content for a transition. Some transitions like crossfade are centered at the end/starting point of a clip. So it expands past/before this point, hence the need of additional content in the file.
I didn't know about that multicore issue with Compressor when launched directly from the timeline. I suspect an issue with your setup. Compressor does make good use of my 4 cores on mpeg2 and I never set up Qmaster.
H. Flower
Apr 11, 02:32 PM
For the past three years, Apple's decisions in the professional market have been a bag of fail.
Anyone else starting to get a sinking feeling?
Anyone else starting to get a sinking feeling?
radiohead14
Apr 20, 01:49 PM
These ipad clone tablets made by samsung are not worth the price.
you forgot to say "in my opinion".. please don't speak for everyone.
you forgot to say "in my opinion".. please don't speak for everyone.
shawnce
Jul 27, 11:27 AM
Once again, I read it and read it well. The big deal about the G5 being in Mac was that the entire system was redesigned for better performance. Go read about the G5 system architecture if apple still has it up.
I think you are missing some important facts review ...
Intel announces Core 2 Duo processors, price cuts; AMD fires back (http://arstechnica.com/news.ars/post/20060727-7364.html)
Into the Core: Intel's next-generation microarchitecture (http://arstechnica.com/articles/paedia/cpu/core.ars)
Intel Core 2 (http://en.wikipedia.org/wiki/Core_2)
List of Intel Core 2 microprocessors (http://en.wikipedia.org/wiki/List_of_Intel_Core_2_microprocessors)
1) To put it simply the Core 2 family of processors can outperform existing G5s clock for clock and core for core (in many many tasks)... this has nothing to do with just increasing clock rates as you seem to imply in your prior post.
2) The chipset that supports the Core 2 (and Core) has generally greater capabilities (and fewer parts) then the chipset that supports the G5 Macs.
Compare iMac G5 (http://developer.apple.com/documentation/Hardware/Developer_Notes/Macintosh_CPUs-G5/iMacG5/index.html)...
http://developer.apple.com/documentation/Hardware/Developer_Notes/Macintosh_CPUs-G5/iMacG5/Art/050832001303_01.jpg
...to iMac Core Duo (http://developer.apple.com/documentation/HardwareDrivers/Conceptual/iMac_06Jan/index.html)...
http://developer.apple.com/documentation/HardwareDrivers/Conceptual/iMac_06Jan/Art/051183001314_01.jpg
...and the chipset in a PowerMac replacement will easily exceed the capabilities of the current PowerMacs.
I think you are missing some important facts review ...
Intel announces Core 2 Duo processors, price cuts; AMD fires back (http://arstechnica.com/news.ars/post/20060727-7364.html)
Into the Core: Intel's next-generation microarchitecture (http://arstechnica.com/articles/paedia/cpu/core.ars)
Intel Core 2 (http://en.wikipedia.org/wiki/Core_2)
List of Intel Core 2 microprocessors (http://en.wikipedia.org/wiki/List_of_Intel_Core_2_microprocessors)
1) To put it simply the Core 2 family of processors can outperform existing G5s clock for clock and core for core (in many many tasks)... this has nothing to do with just increasing clock rates as you seem to imply in your prior post.
2) The chipset that supports the Core 2 (and Core) has generally greater capabilities (and fewer parts) then the chipset that supports the G5 Macs.
Compare iMac G5 (http://developer.apple.com/documentation/Hardware/Developer_Notes/Macintosh_CPUs-G5/iMacG5/index.html)...
http://developer.apple.com/documentation/Hardware/Developer_Notes/Macintosh_CPUs-G5/iMacG5/Art/050832001303_01.jpg
...to iMac Core Duo (http://developer.apple.com/documentation/HardwareDrivers/Conceptual/iMac_06Jan/index.html)...
http://developer.apple.com/documentation/HardwareDrivers/Conceptual/iMac_06Jan/Art/051183001314_01.jpg
...and the chipset in a PowerMac replacement will easily exceed the capabilities of the current PowerMacs.
No comments:
Post a Comment